AU-Gauge Car Dent Puller - Paintless Plastic Weld Dent Removal with Comprehensive Glue Tabs Kit
$155.99 NZD
Approx $92.24 USD
Approx $92.24 USD
or 4 payments of $39.00 with
Material: Insulation Materials
Power Mode: Power Supply
Operating Voltage: 110V/220V
Plug Type: Australian Gauge Plug
Feature: 1.It is much cheaper than a body repair shop because it does not have high paint materials and labor costs. 2.Save more time, no need to wait for car dent repair in repair shop. 3.The operation is simple, most of the dent removal can be completed within half an hour. 4.No need to disassemble the car. 5.This tool is not only used to remove car dents, but can also be used for DIY home repairs.Steps for usage: 1. Clean the surface with a clean damp cloth. 2. Stick the glue stick on the gun, turn on the power, and warm up for 5-10 minutes. 3. Choose the glue pull tab according to the size of the dent, then put the heated glue on the pull tab, immediately put the pull tab in the center of the dent and keep it until it sticks. 4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter.5. After the glue cools, align it with a golden dent lifter,and press the puller to pull up the dent. Repeat the above steps until the dent disappears. 6. After the dents are completed, use 95% alcohol to clean the remaining glue on the surface of the car body with a plastic shovel. 7.If the operation would not succeed,please operate repeatedly.
Power Mode: Power Supply
Operating Voltage: 110V/220V
Plug Type: Australian Gauge Plug
Feature: 1.It is much cheaper than a body repair shop because it does not have high paint materials and labor costs. 2.Save more time, no need to wait for car dent repair in repair shop. 3.The operation is simple, most of the dent removal can be completed within half an hour. 4.No need to disassemble the car. 5.This tool is not only used to remove car dents, but can also be used for DIY home repairs.Steps for usage: 1. Clean the surface with a clean damp cloth. 2. Stick the glue stick on the gun, turn on the power, and warm up for 5-10 minutes. 3. Choose the glue pull tab according to the size of the dent, then put the heated glue on the pull tab, immediately put the pull tab in the center of the dent and keep it until it sticks. 4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter.5. After the glue cools, align it with a golden dent lifter,and press the puller to pull up the dent. Repeat the above steps until the dent disappears. 6. After the dents are completed, use 95% alcohol to clean the remaining glue on the surface of the car body with a plastic shovel. 7.If the operation would not succeed,please operate repeatedly.
The product may be provided by a different brand of comparable quality.
The actual product may vary slightly from the image shown.
.jpg)
.jpg){kind=logo}
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpg)
.jpeg)
.jpg)
ulva-Logo.jpg){kind=logo}
.jpeg)
.png)
.png)
