Digital display fat caliper fat clip measuring clip
Approx $26.27 USD
Use steps
Step 1: fat caliper claws, then press "zero" (the reset button) cleared.
Step 2: where the skin folds are measured. (about one inch on the right hip)
Step 3: standing, with your thumb and index finger firmly pinching the skin fold, continue to left-handed pinch the skin fold, put the
electronic fat caliper claws in the above measurement.
Step 4: press and hold the jaw until you feel a slight pain. Then press the "HOLD" key to keep the measurement data. After reading the
measured value, press the "HOLD" key to continue the previous step. Repeat three times, take the average value of the reading. Corresponding
body fat control table, determine your body fat percentage, see if it is in line with the standard.
Product specifications:
1 measurement range 0-50mm
2 resolution 0.1mm/0.01"
3 allow the error of + 0.2mm
4 using temperature: 0 degrees C - +40
5 storage temperature: -20 degrees C - +70
6 battery: 3V button battery
.jpg){kind=logo}
.jpg)
.jpg)
.jpg)
ulva-Logo.jpg){kind=logo}
